| |
|
|
|
| |
 |
| |
Profile Geomembrane liner
Features
| 1. |
As it is made from special PVC resin, the product possesses an excellent physical properties, and is in conformity to the PGI(PVC Geomembrane Institute) specification of USA . |
| 2. |
The waterproof character requirement has been fully considered while designing the best formulation composition, in addition to weather resistance and anti-volatility. |
| 3. |
fine production technique brings a full assurance of stable physical properties and appearance quality. |
| 4. |
To meet the installation efficiency requested by customers, product softness can be appropriately adjusted. |
| 5. |
product can be suitable for heat sealing, high frequency welding , and adhesion agent processings. |
|
 |
| Product Code |
THICKNESS(mm) |
WIDTH(“) |
Put up(y) |
Hardness(PHR) |
| FPP |
0.20~0.39 |
20~107 |
>300 |
46~70 |
| 0.40~0.60 |
20~103 |
>300 |
46~70 |
| 0.601~0.799 |
20~95 |
>300 |
46~70 |
| 0.8~1.499 |
20~78.7 |
30~50 |
30~70 |
| 1.5~2.00 |
20~72 |
30~50 |
30~70 |
|
| |
|
Application
| 1. |
Environment: garbage dumping site, hillside drainage and slope protection. |
| 2. |
Water conservation: reservoir, artifical lake, fish pond, drainage, and irrigation ditch. |
| 3. |
Civil Engineering: coverage, tunnel drainage, embankment, shoreline protection against sea water corrosion or sinking of the ground , road base and pit. |
| 4. |
Industry: cesspool, trash dumping. |
|
 |
| |
|
Specification
| Thickness |
Width(max) |
Put up |
| 10mil(0.254m/m) |
112” |
600y |
20mil(0.508m/m)
|
110” |
300y |
30mil(0.762m/m)
|
92” |
250y |
40mil(1.016m/m)
|
85” |
200y |
50mil(1.270m/m)
|
79” |
100y |
| 60mil(1.524m/m) |
79” |
80y |
| Remark: please contact us if there is any requirements,out of the specification above-mentioned. |
|
|
| |
|
Physical Properties
Property
Thickness |
Unit
mils |
Standard Value |
Test Method
ASTM D5199 |
| 10 |
20 |
30 |
40 |
50 |
60 |
Tensile properties |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
ASTM D882
Method A or B |
| Strength at break(min) |
lbs/in |
24 |
48 |
73 |
97 |
116 |
137 |
| Elongation(min) |
% |
250 |
360 |
380 |
430 |
430 |
450 |
| Modulus at 100%(min) |
lbs/in |
10 |
20 |
30 |
40 |
50 |
60 |
| Tear Strength(min) |
lbs |
2.5 |
6 |
8 |
10 |
13 |
15 |
ASTM D1004 |
Dimensinal
Stability(max) |
% |
4 |
4 |
3 |
3 |
3 |
3 |
ASTM D1204 |
| Low Temperature impact (pass) |
°F |
-10 |
-15 |
-20 |
-20 |
-20 |
-20 |
ASTM D1790 |
| Special Gravity |
g/cc |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
ASTM D792 |
| Water Extraction (max) |
-% |
0.15 |
0.15 |
0.15 |
0.2 |
0.2 |
0.2 |
ASTM D1239 |
| Volatile loss (max) |
-% |
1.5 |
0.9 |
0.7 |
0.5 |
0.5 |
0.5 |
ASTM D1203 |
Soil BurialBreak |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
ASTM G160 |
| strangth (max) |
% |
5 |
5 |
5 |
5 |
5 |
5 |
| Elongation (max) |
% |
20 |
20 |
20 |
20 |
20 |
20 |
| Modulus at 100% (max) |
% |
20 |
20 |
20 |
20 |
20 |
20 |
| Hydrostatic Resistance(min) |
psi |
42 |
68 |
100 |
120 |
150 |
180 |
ASTM D751 |
| Shear Strength(min) |
lbs/in |
20 |
38.4 |
58.4 |
77.6 |
96 |
116 |
ASTM D882 |
| Peel Strength(min) |
lbs/in |
10 |
12.5 |
15 |
15 |
15 |
15 |
ASTM D882 |
|
|
|
|
 |
|
|
|
